![]() |
|
|
|
#1
|
|||
|
|||
Driver Door CLUNK in 300E
My 87 300E has developed a loud CLUNK when opening and closing the door, I took off the door panel and tightened a loose 10mm bolt that is towards the front and it got a lot better and almost normal, now the clunk is back, before I go tearing into it again, ( i hate working in that small space) can anyone tell me what to look for or any short cuts ? Thanks in advance
__________________
Jerry 2004 SL500 Black 55K Miles ![]() 2002 s500 Black 90K Miles ![]() 1986 300E Gold 233K Miles ![]() 1966 Twin Cessna 320D ![]() 1989 Jeep Cherokee 233K Miles ![]() 1994 Ford Van E150 399K Miles ![]() |
#2
|
|||
|
|||
Sounds like you need a new door check.
You may be able to salvage it by re-greasing. http://catalog.eautopartscatalog.com/mercedesshop/sophio/wizard.jsp?partner=mercedesshop&clientid=catalog.mercedesshop&baseurl=http://catalog.peachparts.com/&cookieid=1IY0V9AYZ1M219SS7U&year=1988&make=MB&model=300-E-002&category=O&part=Door+Check |
#3
|
||||
|
||||
door check.
you'll need to remove the unit completely to regrease it and that may not work either. there are two large ball bearings which provide a detent at door open and closed, they wear a groove in the casing and can jam at inopportune moments, I had to rush to the supermarket once to assist my wife who couldn't get the drivers door shut. if this happens, and its your lucky day, a firm shove will release the bearing and close the door. beware, this will work one time only so don't get cocky and think you've fixed it. i did and opened the door again to see if it worked. had to strip off the door panel and remove the door check in the car park. not a good look.
__________________
1987 300e manual 250,000 km (sold) |
#4
|
|||
|
|||
Don't waste your time trying to re-grease..... it likely won't work... just spend the 20 dollars for a door check... there's a good chance when you take off the panel, the brittle plastic panel holders may separate from the panel.....
...when you put it together apply strong glue to the backs...shut the door...and keep it shut for 12 hours.... The entire door check procedure should take you less than an hour to replace....
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k ![]() 1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC] |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebadging '87 300e | emr0591 | Detailing and Interior | 6 | 09-04-2007 09:12 AM |
'86 300E vs '91 300E... Any opinions out there??? | pjtib | Tech Help | 23 | 05-04-2005 09:26 PM |
Parting Out 300e w124 LOW MILES | 6cndmbz | Mercedes-Benz Used Parts For Sale & Wanted | 23 | 10-06-2003 12:29 PM |
FS 300e w124 PARTS ON EBAY!!!!!!! | 6cndmbz | Mercedes-Benz Used Parts For Sale & Wanted | 4 | 09-20-2003 12:14 PM |
Transmission Question 1988 300E (Need Technical help)n | china beach | Tech Help | 4 | 03-26-2002 10:25 AM |