![]() |
|
|
|
#1
|
||||
|
||||
![]()
I am working on installing aftermarket cruise on my 300sd (audiovox ccs-100) and was wondering if the stock speedo sensor feed can be used to give signal to the audiovox unit? I'd rather not have to add the magnet/sensor under the car....
Anyone know if this is possible?
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#2
|
||||
|
||||
That should work fine.
-Jason
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket ![]() Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#3
|
||||
|
||||
Has anyone done it successfully? Is the signal the right type for the cruise unit to be able to read it?
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#4
|
||||
|
||||
Anyone?
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#5
|
|||
|
|||
Yes it has a VSS. I think its pin 11 on the cruise amp. (Green/yellow wire)
check out this post. http://www.peachparts.com/shopforum/showthread.php?t=219993&highlight=audiovox&page=2
__________________
92 300D 2.5L OM602 OBK #59 |
#6
|
||||
|
||||
Awesome, does anyone know the pulse rate of the MB sensor? Or what I should set the audiovox unit to?
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#7
|
|||
|
|||
When I documented my installation in the above post, I was unable to get the stock vss signal to work. The sensor on the driveshaft is not a big deal... It took me longer to put the front of the car up on the jackstands than it took me to install the magnet and sensor.
__________________
Mike 1983 Mercedes-Benz 300SD 270K 1960 Ford F250 62K 1990 Mazda Miata 156k The thing is Bob, it's not that I'm lazy, it's that I just don't care. |
#8
|
||||
|
||||
Quote:
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#9
|
|||
|
|||
8000 PPM is the setting. Pin 11
__________________
92 300D 2.5L OM602 OBK #59 |
![]() |
Bookmarks |
|
|