|
|
|
|
|
#1
05-03-1999, 05:53 PM
|
|||
|
|||
|
I have a slight Buzz in the wood trim on the right front door of a '91 300E. Gets very niticable when stereo plays loud bass sounds. How can I remove the trim to re-install (I guess with some foam padding underneath). Thanks.
|
|
#2
05-03-1999, 08:53 PM
|
|||
|
|||
|
Brooks,
This is a common problem among ALL W124's. Unfortunately, there is no good fix for it. I have been told it is necessary to remove the door panel and then tighten down a screw on the inside.(and add locktite IMO) Probably more trouble than it is worth. You can always wedge a bit of foam/felt in the edge to quell the noise short term. Unless Benzmac or MB DOC knows another way to access that area...that is all the help I can offer. Hope this helps...Lee |
|
#3
05-03-1999, 10:40 PM
|
|||
|
|||
|
You have to take off the door panel to do tighten the nuts on the back side.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
|
#4
05-05-1999, 01:31 PM
|
|||
|
|||
|
any suggested things to watch out for during removal/replacement (breakage issues)?
|
|
#5
05-05-1999, 10:40 PM
|
|||
|
|||
|
Just remove the nuts one at a time and apply a small drop of blue Loc-Tite to the stud. Gently re-tighten.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
 |
| Bookmarks |
|
|
Linear Mode
