|
|
|
#1
|
||||
|
||||
Replacing all the a/c O rings
1988 300E. I'm replacing all the black, original O rings with the new green style. I bought a kit from Phil at Fastlane for my car but it didn't include the O rings for the compressor flange. Anyone know where I can buy some? Thanks.
|
#2
|
|||
|
|||
You might call or email Phil to see if he has them by another part number. If not, Arizona Mobile Air will probably stock what you need.
|
#3
|
||||
|
||||
My local Car Quest and Napa carry universal kits for about $8 that also include the round "springs" and such. So far one kit has been enough for two cars. But I have not tried the kits on the Benz.
__________________
1991 560 SEL / 185k miles 1992 750il / 17k miles - project car |
#4
|
||||
|
||||
Do they come with instructions?
If you have time can you give us a recap? Thanks glenmore 1991 300CE 1999, 2000 C280 2000 C230K |
#5
|
||||
|
||||
Instructions? No. But the o-rings are pretty easy to do on the cars I have. I have NOT looked at the connections on a Benz. But if I assume they are they same then all one needs is an AC connection decoupler kit. They are plastic, and over-priced, tools that come in several sizes. They open up then close down on the tube. Then you push the tool into the coupling where it spreads a round spring that is holding the tube in place. Hard to describe and I do not have pics. Then the line backs out. Usually two o-rings per connection. Just VERY carefully remove the o-rings and replace. Best not to try to cut of the old ones, any metal nicks will be very bad.
__________________
1991 560 SEL / 185k miles 1992 750il / 17k miles - project car |
#6
|
||||
|
||||
Some vids:
http://www.youtube.com/watch?v=pflucFXDuCU http://www.youtube.com/watch?v=0HTudC3JVWQ If the Benz has no coupling locations, you do not need those plastic decouplers. Link for example of those below. http://www.alibaba.com/product-gs/298310611/A_C_fuel_line_quick_disconnect.html
__________________
1991 560 SEL / 185k miles 1992 750il / 17k miles - project car |
#7
|
|||
|
|||
My '96 doesn't use those spring couplers and neither did the '83 we had. Either the fittings were bolted flush with studs and nuts (TXV and compressor) or screwed together.
|
#8
|
||||
|
||||
__________________
Jim |
Bookmarks |
|
|