I just purchased a set of used Bosch euros on ebay. I know I need to get the correct connectors for them, but is there another pin that I can buy at the dealership to hook up the city lights?

__________________
1984 300SD Orient Red/ Palomino
1989 560SEC
2016 Mazda 6 6 speed manual
1995 Ford F-150 reg cab 4.9 5speed manual

to make the city lights work use a jumper wire from the side markers to pin # 4 on the euros.

__________________
1985 300TD Turbo Euro-wagon
1979 280CE 225,200 miles
1985 300D Turbo 264,000 miles
1976 240D 190,000 miles
1979 300TD 220,000

GONE but not forgotten
1976 300D 195,300 miles
1983 300D Turbo 175,000 miles

http://i42.photobucket.com/albums/e3...e485-1-2-1.jpg

Look at the Resources Tab on top of screen, then DIY articles then W126 Euro Lights.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)

I installed my headlights last night using a wiring diagram I found somewhere here. The drivers side was a snap. The passenger side wire colors did not match though. I spent more time fiddling with the wires trying to get them to work properly than I did installing the actual lights. My question is: My blinkers in the front dont work now and for a while the interior lights were not working while the headlights did. Has anyone ever had this problem while installing these lights? I dont see how I could have botched this simple job. For some reason the interior lights decided to start working again. Just my blinkers are bad, unless with all of my playing with them I weakened the fillaments because they still look good.

__________________
1984 300SD Orient Red/ Palomino
1989 560SEC
2016 Mazda 6 6 speed manual
1995 Ford F-150 reg cab 4.9 5speed manual