Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-18-2008, 01:53 PM
Registered User
 
Join Date: Apr 2007
Posts: 13
Wackey steering wheel problem !!!

My steering wheel changes center! the steering wheel will be straight the wheels are straight one day, then I'll get in it after wife has driven and the wheels will be straight and the steering wheel will be sideways. What would cause the steering wheel to not be centered or change? by this I mean the cross bar on the steering wheel will be straight across at nine o'clock & three o'clock then it will change to eight o'clock & two o'clock. WHY ?

Reply With Quote
  #2  
Old 08-18-2008, 02:01 PM
Registered User
 
Join Date: Oct 2007
Location: Greater Metropolitan Beaverdam VA
Posts: 2,877
off center

Has this happened more than once? I guess your wife won't admit how hard she hit that curb in the shopping center.
Reply With Quote
  #3  
Old 08-18-2008, 02:14 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804


Which Time Zone are you in ???
__________________
A Dalton
Reply With Quote
  #4  
Old 08-18-2008, 03:33 PM
Dee8go's Avatar
Senor User
 
Join Date: Apr 2006
Location: The People's Republic of Arlington, VA
Posts: 7,197
My biggest problem with the steering wheel is when other people in the car attempt to drive from positions other than the driver's seat. . . .
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century

OBK #55

1998 Lincoln Continental - Sold
Max 1984 300TD 285,000 miles - Sold
The Dee8gonator 1987 560SEC 196,000 miles - Sold
Orgasmatron - 2006 CLS500 90,000 miles
2002 C320 Wagon 122,000 miles
2016 AMG GTS 12,000 miles
Reply With Quote
  #5  
Old 08-18-2008, 03:51 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Is she turning the key off before returning the SW to lock position ????
__________________
A Dalton
Reply With Quote
  #6  
Old 08-18-2008, 04:00 PM
Registered User
 
Join Date: Jul 2007
Location: USA
Posts: 2,156
Quote:
Originally Posted by Arthur Dalton View Post


Which Time Zone are you in ???
HAHA

Did she hit something and knock the alignment off?

I would get an alignment after your steering and suspension parts are inspected and/or replaced.
__________________
1986 300SDL, 211K,Dealership serviced its whole life
1991 190E 2.6(120k)
1983 300D(300k)
1977 300D(211k)
Reply With Quote
  #7  
Old 08-18-2008, 06:31 PM
Registered User
 
Join Date: Sep 2004
Location: Seattle
Posts: 1,971
I think the question is is it going back and forth from one day to the next, and then back again, or did it change once and that's it? If it is changing daily then I would guess there is something(s) very worn in the steering components such as tie rod ends, drag link, ball joints etc. I suppose it could be the steering gear/box also. If you want more specific info you need to state what car you are talking about.
__________________
1998 C230 330,000 miles (currently dead of second failed EIS, yours will fail too, turning you into the dealer's personal human cash machine)
1988 F150 144,000 miles (leaks all the colors of the rainbow)
Previous stars: 1981 Brava 210,000 miles, 1978 128 150,000 miles, 1977 B200 Van 175,000 miles, 1972 Vega (great, if rusty, car), 1972 Celica, 1986.5 Supra
Reply With Quote
  #8  
Old 08-18-2008, 09:39 PM
Registered User
 
Join Date: Apr 2007
Posts: 13
Its ramdom, I think that when she backing out of driveway she turning very sharp to the end of steering range or the stop point. Could this cause it to jump a cog in the steering ? Its a 1993 300E 160000 miles . checked alignment good. left tie rod worn but how could that change steering wheel postion? Could it be dangerous or normal wear?
Reply With Quote
  #9  
Old 08-19-2008, 10:35 AM
david s poole
 
Join Date: Mar 2005
Location: dallas
Posts: 1,822
just had customer's car in with lots of play on centre[88 300e] problem turned out to be power steering gear box.something had let go inside box.i have never seen this before.
__________________
David S Poole
European Performance
Dallas, TX
4696880422

"Fortune favors the prepared mind"
1987 Mercedes Benz 420SEL
1988 Mercedes Benz 300TE (With new evaporator)
2000 Mercedes Benz C280
http://www.w108.org/gallery/albums/A...1159.thumb.jpg
Reply With Quote
  #10  
Old 08-20-2008, 02:07 PM
Registered User
 
Join Date: Apr 2007
Posts: 13
Was it driveable, Is this something that could cause me to loose control all at once or is it a gradual problem?
Reply With Quote
  #11  
Old 08-20-2008, 02:16 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
If you are concerned about the box being a problem, then I would turn the SW to r and l lock w/engine running and see what happens ..does it hold nicely at lock w/pressure?????????
__________________
A Dalton
Reply With Quote
  #12  
Old 08-20-2008, 05:30 PM
JimFreeh's Avatar
Benz addict
 
Join Date: Mar 2007
Location: Hampton Roads, Virginia
Posts: 3,366
You need to make a hand over hand check of you steering system.

Could be anything from the rag joint on the steering column, to a steering box that's not tight on the frame, to a shot idler, or any of the ball joints in the steering linkage.


Jim
__________________
14 E250 BlueTEC black. 45k miles
95 E320 Cabriolet Emerald green 66k miles
94 E320 Cabriolet Emerald green 152k miles
85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles
Reply With Quote
  #13  
Old 08-20-2008, 06:02 PM
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
< steering box that's not tight on the frame,>

I like that thought...specially as a few models do have a Benz recommendation on checking the mount bolts for just that reason..

..of course , it would be beneficial for the poster to mention the model/year.
__________________
A Dalton
Reply With Quote
  #14  
Old 08-20-2008, 08:15 PM
Registered User
 
Join Date: Jul 2007
Location: USA
Posts: 2,156
Quote:
Originally Posted by Arthur Dalton View Post
< steering box that's not tight on the frame,>

I like that thought...specially as a few models do have a Benz recommendation on checking the mount bolts for just that reason..

..of course , it would be beneficial for the poster to mention the model/year.
lol
__________________
1986 300SDL, 211K,Dealership serviced its whole life
1991 190E 2.6(120k)
1983 300D(300k)
1977 300D(211k)
Reply With Quote
  #15  
Old 08-21-2008, 10:25 AM
Registered User
 
Join Date: Jan 2003
Location: Matthews, NC
Posts: 1,356
Check the steering coupler at the steering box. It looks like a small U-Joint kinda. If the pinchs are loose you could have this problem. It needs to be fixed before the car is driven again. It may not cause any problems but just think of what COULD happen if it fails completly and you loose all steering control.
Paul

__________________
84 500 SEL (307,xxx miles)
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page