|
|
|
|
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
06-23-2008, 05:53 PM
|
|||
|
|||
|
Do lifters/HLC's/ball studs need to be prepared before installing?
I was wondering if they should be soaked in oil before putting them in, to kind of pre-fill them, or do I just pull out the little plastic plug and screw them in? I'm working on a tapping on the '86 560SL, 117 engine.
Do I need to replace the rocker too, or just the lifter if the rocker is in good shape?
__________________
1986 560SL 2002 Toyota Camry 1993 Lexus 
|
|
#2
06-23-2008, 06:08 PM
|
||||
|
||||
|
Just put them in the way they come out of the box. No need to replace the cam follower if there is not a problem. Good idea to check to see if any changes in the shim are needed.
__________________
I got too many cars!! Insurance eats me alive. Dave 78 Corvette Stingray - 3k 82 242 Turbo Volvo - Manual - 270k 86 300e 5 speed manual - 210k 87 420sel - 240k 89 560sl - 78k 91 420sel - 205k 91 560sel - 85k 94 GMC Suburban - 90k 97 Harley Davidson Heritage Softail - 25k 00 GMC Silverado 1 ton 30k
|
|
| Bookmarks |
|
|
Linear Mode
