|
|
|
|
|
#1
06-22-2007, 06:10 PM
|
|||
|
|||
|
Noise ????
87 560sel w126
Have front noise, sounds to be bearing so I changed both front bearing/rotors and pads. Bearings were "dark/worn". No Change! Still have what sounds like a slight "roaring" bearing noise. Does not change with speed or curves, however does seem louder when braking to a stop. Any help appreciated! John1 
|
|
#2
06-22-2007, 07:06 PM
|
|||
|
|||
|
assume you know to tighten bearings until you cannot turn hub and then back off about a turn.is it possible you left caliper mount bolt loose?have you jacked up car at front and spun wheels to make sure that the tire tread has no bulges in it[square wheels]? have you switched the front tires to the rear to see if noise follows them? all i can think of now.
__________________
David S Poole European Performance Dallas, TX 4696880422 "Fortune favors the prepared mind" 1987 Mercedes Benz 420SEL 1988 Mercedes Benz 300TE (With new evaporator) 2000 Mercedes Benz C280 http://www.w108.org/gallery/albums/A...1159.thumb.jpg
|
 |
| Bookmarks |
|
|
Linear Mode
