92 190e 2.6L - shifting problems - PeachParts Mercedes-Benz Forum

Joseph_190E · #1 01-11-2007, 03:42 PM

I always have to push a little harder for the tranny to get in gear (D drive)? When I put it in D it seems like it is in Neutral. Therefore, having to push back a little further does the trick.
Someone told me something on the side of the tranny needs to be replaced???

thanks,
Joseph

david s poole · #2 01-11-2007, 03:44 PM

two small bushings where the shift rod joins the console handle to the side of the trans.

Joseph_190E · #3 01-11-2007, 03:59 PM

Is it an easy DIY?

david s poole · #4 01-11-2007, 06:08 PM

no its a little tough.if you get the bushings and slide off the clips,then cut about 1/32 of the circle out of the bushings you will be able to get them in the holes with a little grease.now slide the rod back through the bushings and get a medium size slot screwdriver and slip it into the top of the clip as an aid to replacing them.