|
|
|
#1
|
|||
|
|||
oil pan, fuel filter
I have an 89 300 TE, I want to change the oil pan gasket and the fuel fliter.
Can I pull the pan right off or do things have to be removed first? What is the torque for the pan bolts? Where is the fuel filter located?? Thanks in advance kchemers
__________________
'05 Ford Escape 100,000 miles '87 560SL 92000 miles '89 300TE 199,000 miles '02 Audi TT 100,000 miles '00 Ford Excursion V-10 121000 miles '92 Mercury Capri 100000 miles '02 BMW 325XI 60000 miles '92 230CE 160000 '87 BMW 535SI 160,000 miles '93 Rinker Captiva 209 5 Kids 2 Dogs 1 Wife |
#2
|
||||
|
||||
The pan gasket is not exactly a DIY job. The engine needs to be jacked up a few inches, and you need quite a bit of clearance to lower the pan at the front. If you have a lift to work on it's no big deal, but if you're on your back it'll be a PITA.
|
#3
|
|||
|
|||
Fuel filter and fuel pump are under the car forward of the right rear tire toward the center of the car ... basically directly below the right rear passenger seat. A black plastic cover protects these components from road grime.
__________________
Fred Hoelzle |
#4
|
|||
|
|||
You'll drain your fuel tank if you don't have special hose clamping tool.
__________________
Kent Christensen Albuquerque '07 GL320CDI, '10 CL550. '01 Porsche Boxster Two BMW motorcycles |
Bookmarks |
|
|