The vinyl surrounding the seat belt height adjuster has come unglued. Anyone had any luck fixing this before? I took a look behind the vinyl and it looks difficult to reglue without taking everything apart. I'd rather not have to take the whole pillar apart. I'm afraid I would create more problems than I would fix.

Attached Thumbnails

 

__________________
Eric Zacharias

'88 300 SEL
'64 Ford Falcon
'99 Infiniti QX4

You have to take the pillar cover off to glue it back.
There are two screws holding the plastic cover (under he pillar cover), remove these and take the plastic cover off. The pillar cover comes off if you pull it downwards.

i have just used 3m upholstery glue spray... and tucked it back in....

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]

Thanks. I think I'll try the upholstery glue spray first and if that doesn't do it I'll take off the pillar.

__________________
Eric Zacharias

'88 300 SEL
'64 Ford Falcon
'99 Infiniti QX4