|
|
|
#1
|
|||
|
|||
93 190e EGR vacumm hose ???
Hi,
The vacuum hose from the EGR valve is missing on my 93 190e 2.3. The EGR valve sits on the exhaust manifold. Where does this vacuum hose go to ??? Any ideas ?? Thanks. smk_texas 98 s420 93 190e |
#2
|
|||
|
|||
The vac line should go between the EGR and the SOV in front of the engine [ next to the AIR pump SOV.]
|
#3
|
|||
|
|||
Thanks Arthur. I'll connect that and see if my check engine light goes away.
smk_texas 98 s420 93 190e |
#4
|
|||
|
|||
Check the plastic line feeding the SOVs from the engine intake..that is the one that always cracks b/c it is plastic.
|
#5
|
|||
|
|||
Hi Arthur,
I have a question though, what size vacuum hose should I be buying for EGR valve connection ?? Thanks. |
#6
|
|||
|
|||
Hi Arthur,
There are two ports (for lack of a better term) in this valve I am looking at. One at top and one @the bottom. The one at the top is connected with a elbow hose which is connected to a plastic brown hose. The bottom port is not hooked up. Is this where the hose from EGR valve hooks up ???? This valve is right behind the thermostat housing and to the right of the water temp sensor. Is this correct. ??? Thanks very much for your help. |
#7
|
|||
|
|||
Sorry, but I do not have vac routing layout for 201 chassis,, possible someone here does?????????
|
#8
|
|||
|
|||
Hi Arthur,
Attached is the picture of the valve i am looking at. Is this the one ?????Looks like I need to buy a new one because the one on the car has only one prong & the insulation is stripped. Thanks |
#9
|
||||
|
||||
Quote:
jp
__________________
Jeff Pierce Current Vehicles: '92 Mercedes 190E/2.3 (247K miles/my daily driver) '93 Volvo 940 Turbo Wagon (263K miles/a family truckster with spunk) '99 Kawasaki Concours Gravely 8120 Previous Vehicles: '85 Jeep CJ-7 w/ Fisher plow (226K miles)'93 Volvo 940 Turbo Wagon '53 Willys-Overland Pickup '85 Honda 750F Interceptor '93 Nissan Quest '89 Toyota Camry Wagon '89 Dodge Raider '81 Honda CB 750F Super Sport '88 Toyota Celica '95 Toyota Tacoma '74 Honda CB 550F |
#10
|
|||
|
|||
Thanks JP. I believe you are correct. I found a vac diagram here on the forum for a 201 and it says the same thing. I'll hook it up after I get my parts this week. Thanks again for your help
smk_texas 98 s420 93 190e |
Bookmarks |
|
|