All M110's were desined to idle high during warmup phase. Does anyone know how to lower this cold idle down to within a levl closer to final idle speed? It looks like the warmup regulator relies on the temp sensor mounted on cyl. head. I'm thinking an additional resistor in this circuit will do it without effecting the cold start valve

__________________
83 280TE- 5 spd, 16.5mm rear sway
85 280SL- 15" Bundts, 5 spd

The M110 engine uses an additional air valve..has it's own thermostat built in

See parts break-down...

Attached Files

M110 intake.pdf (50.6 KB, 281 views)

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator