The wiring diagram for my car shows an item called a "Ground Connector Sleeve" its designated as Z6/1. Basically one of my coolant sensor wires first goes through this sleeve, and than continues to chassis ground.

The reason I am asking is that I had to run a new wire, but I ran it straight to chassis ground, bypassing that "ground connector sleeve".

I did that, since I don't know where this "ground connector sleeve is located", nor do I know what it is, or what it does. Does anyone know?

Thanks

Phil

__________________
'95 E300 Diesel, 264,000 Miles. [Sold it]

That means 2 OR more wires join together & then either are grounded (in your case) or are fed power.

That Z6/1 could be anywhere in the engine wiring harness!

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks M.B.DOC.

That answers my question precisely.

Phil

__________________
'95 E300 Diesel, 264,000 Miles. [Sold it]