Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > ML, GL, G-Wagen, R-Class, Unimog, Sprinter

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-06-2006, 10:56 AM
Registered User
 
Join Date: Jun 2005
Location: Chicagoland
Posts: 1,248
4x8 sheets of drywall?

I'm doing some house work this weekend. Does anyone know if a 4x8 sheet of drywall will fit in the back of a 1999 ML320? I'm only going 2.5 miles so it's ok if it hangs out.

Thanks.

Reply With Quote
  #2  
Old 09-06-2006, 11:26 AM
DCF DCF is offline
Registered User
 
Join Date: May 2005
Posts: 193
I have an ENORMOUS amount of experience with this one (I think I have hauled 6-8 loads of drywall / plywood in mine). I have a 99 ML430. With the seats folded down, a sheet will fit in the truck, but will stick out the back a few inches no matter what. Just how far it sticks out is based on how far up you slide the driver's seat, but even with it all the way up, you cannot shut the gate. Bring a bungee cord and hook it to the tailgate latch on the door and onto that striker on the floor of the cargo area to keep the gate from bouncing all over on the way home. Oh, and another tip: DO NOT PUT THE HOOK OF THE BUNGEE CORD INTO THE DRAINHOLE IN THE MIDDLE OF THE TAILGATE. I know, it looks tempting to do that, but when you try and get the darn hook out, you will put a reverse dimple in the back of the gate which will annoy you till this very day.

Also, you CANNOT lay a 4x8 sheet flat in the back, it will need to be propped up aganst the back tailgate frame, at a level about equal to that of the little cargo net hooks, with the other edge on the floor. Now, how much drywall can she haul? Well, the most I did at a time was 4 "doubles" of 1/2" 4x8 drywall (8 full sheets). I expect that it could hold more in terms of both weight and space, HOWEVER, since you have the sheets propped up on the side against the frame of the gate (on an angle) one on top of another, that bottom sheet of drywall is bearing a LOT of "flying" weight. I expect that 9 sheets or more would be too much weight and the bottom sheet would break. The ML is strong, sheetrock is not.
Reply With Quote
  #3  
Old 09-06-2006, 11:35 AM
Registered User
 
Join Date: Jun 2005
Location: Chicagoland
Posts: 1,248
That's great information. Thank you.
Reply With Quote
  #4  
Old 09-06-2006, 02:15 PM
Dee8go's Avatar
Senor User
 
Join Date: Apr 2006
Location: The People's Republic of Arlington, VA
Posts: 7,197
Better get a G Wagon just to be on the safe side.

__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century

OBK #55

1998 Lincoln Continental - Sold
Max 1984 300TD 285,000 miles - Sold
The Dee8gonator 1987 560SEC 196,000 miles - Sold
Orgasmatron - 2006 CLS500 90,000 miles
2002 C320 Wagon 122,000 miles
2016 AMG GTS 12,000 miles
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page