I want new wheels for my 400e. Will newer S class wheels fit. same bolt pattern.
wheel dimensions: 16" x 7.5"
offset: 46 mm
bolt circle: 5 on 112 mm
Thanks

i hope so...i have a nice set sitting in my garage that I would like to put on my 300ce... i have been getting conflicting info....

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]

the offset is a bit high....I believe that the OE offset is ET34 or ET36

__________________
Daily Driver: 02 E430 4MATIC
In the family: '03 E500 // '04 ML500 // 64 220SE

Original offset on 400E (1992) is 48mm. A difference of 2mm will never by noticed - less than one twelfth of an inch. Your owner's manual shows the original offset for your car.

its really more of an offset i believe...because the 16's are 7.5 wide... i am going to get a 16 tire mounted on mine soon...so i will be able to clear up this confusion once and for all..

if it doesn't fit..i have a nice set of s class wheels late for sale cheap.

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]

You may want to be carefull because S class and CL class wheels like Ml's use 14mm bolts. Most other MB cars use a 12mm bolt. I have seen S wheels
break off of E classes because the bigger 14mm bolt seat has fractured.
Be carefull.
DR.D

__________________
Dr.Diesel -
Shop Foreman
Master Guild Mercedes-Benz Technician.

Think the dealer is expensive? Do you know how much it costs to train a dealer tech? Or buy the required MB special tools to have on hand?