Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-17-2020, 06:06 PM
Registered User
 
Join Date: Aug 2020
Location: California
Posts: 11
A/C center vent 1994 SL500

I just did the dreaded heater core and now have a problem with the center vent. Fortunately I did not put it completely together, just far enough to check out the system. The dash and all the related parts are still on the side yard.

The flap for the center vent opens but there is no air movement. I spent half a day checking things and finally figured out that if I apply vacuum with a hand vacuum pump to the blend air flap that I get flow out of the center vent. This is a problem I created as it worked fine when I took it apart. I have two control heads and two switchover valves, changing either makes no difference. I have no access to any operational information so am guessing by the name that the blend flap controls outlet temperature.

Does anyone have an idea what I might have done to create this problem and if not all else failing what happens if I tap the vacuum line for the blend air flap into the center flap actuator so that they both open and close at the same time.

I made the mistake of giving the car to my granddaughter as a throw away first car, if I had not it would have made its final trip to Pick a part when the heater core started leaking. It is a 94 north of 280,000 miles and is virtually worthless

Reply With Quote
  #2  
Old 08-27-2020, 01:15 PM
Registered User
 
Join Date: Aug 2020
Location: California
Posts: 11
Thought that I would make a final entry for anyone that might be looking for answers. I am sorry to say that I have none. What I can tell you is that it is an electrical problem but a friend of a friend that has had a mercedes shop for 30+ years can't point me anywhere. I finally found a wiring diagram on line but it is totally worthless. Shows all the wires coming out of the control head and where they are going to but no information on what they connect to in the control. With that I just gave up and connected the signal tube for the blend flap to the signal tube for the center vent flap and she has A/C. it has been in the mid 80's in the garage so do not know if it will roll over to heat when it gets cold but if it does not she can just put on a few more clothes. This is Southern California and it just does not get that cold. Benz and I have had our knock down drag out fight and Benz won.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page