|
|
|
#1
|
||||
|
||||
About to change engines mounts and oil pan gasket
I need the torque speq's for the mounts and the oil pan bolts. If anyone has these for the OM601 that would be great! Thanks.
__________________
1984 190D 2.2 Auto 220k 2001 Jeep Cherokee Sport 70K 2004 Lexus RX-330 ??K 2005 Chrylser Crossfire LTD 6K Play guitar? Go to www.cyberfret.com for free online lessons! |
#2
|
||||
|
||||
Bump
__________________
1984 190D 2.2 Auto 220k 2001 Jeep Cherokee Sport 70K 2004 Lexus RX-330 ??K 2005 Chrylser Crossfire LTD 6K Play guitar? Go to www.cyberfret.com for free online lessons! |
#3
|
|||
|
|||
Mounts:
Bolts from top = 55Nm Bolts from bottom = 40Nm As far as the oil pan goes, I can't find that info in my CD manual for the 601 engine. My guess is 25-30 Nm.
__________________
2001 Dodge Ram 2500 Cummins Turbo Diesel - 4x4, auto, 3.54 gears, long bed ------------------------------------- '92 300D 2.5 Turbodiesel - sold '83 300D Turbodiesel - 4 speed manual/2.88 diff - sold '87 300D Turbodiesel - sold '82 300D Turbodiesel - sold |
#4
|
||||
|
||||
If I did my conversion right... 40 Nm is about 29.5 foot pounds? And 55 Nm is about 40.5 foot pounds?
__________________
1984 190D 2.2 Auto 220k 2001 Jeep Cherokee Sport 70K 2004 Lexus RX-330 ??K 2005 Chrylser Crossfire LTD 6K Play guitar? Go to www.cyberfret.com for free online lessons! |
#5
|
|||
|
|||
Right. To convert Nm to ft*lbs, multiply the Nm by 0.737561.
__________________
2001 Dodge Ram 2500 Cummins Turbo Diesel - 4x4, auto, 3.54 gears, long bed ------------------------------------- '92 300D 2.5 Turbodiesel - sold '83 300D Turbodiesel - 4 speed manual/2.88 diff - sold '87 300D Turbodiesel - sold '82 300D Turbodiesel - sold |
#6
|
||||
|
||||
I know this thread is ANCIENT, but I noticed that the torque specs given are WILDLY incorrect. The correct ones are:
Oil Pan to Cylinder Crankcase: -M6 Bolts: 10 Nm -M8 Bolts: 25 Nm
__________________
Current cars: 2000 ML55 AMG, 174k miles 2003 C240 T-Modell, 202k miles 1995 S320, 207k Miles |
Bookmarks |
|
|