Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-12-2011, 09:32 PM
Registered User
 
Join Date: May 2009
Location: Fremont, NE
Posts: 59
Aftermarket Cruise Control?

I was wondering if there are any decent aftermarket cruise controls for 190D 2.5 cars or any Mercedes precomputer diesel in general? I am guessing a sensor mounted to a driveline or crank or flywheel would do that trick?

Reply With Quote
  #2  
Old 02-12-2011, 09:34 PM
Registered User
 
Join Date: May 2009
Location: Salt Lake City, UT
Posts: 477
there is a big write up on this topic already. can't remember who started the thread but he shows how to hook up to stock control stalk and everything. do a search
__________________
1987 300D 180k
1985 300SD 330k Helga
1992 300D Lola 269k- Sold
1986 325 coupe Bessie >300k Original engine(ODO Broke) sold
2006 2500HD Druamax Linda- Tows boat and looks pretty in garage thats about it
Reply With Quote
  #3  
Old 02-12-2011, 09:37 PM
Registered User
 
Join Date: Jan 2002
Posts: 18,350
Yes, an electric Rostra cruise control will work. I put one on my CAT 3208/Wanderlodge.
__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13
Reply With Quote
  #4  
Old 02-12-2011, 09:44 PM
oldiesel's Avatar
Registered User
 
Join Date: May 2007
Location: florida
Posts: 677
Put the Rostra electronic in our 87 wagon not too difficult if you can read a wiring diagram and make sense of it.There is no support from Rostra for european cars but there are a couple of good writeups on here.Ours works great and i feel its money well spent to get modern electronics and a 3 yr warranty as opposed to trying to keep 25 yr old stuff working. Don
__________________
Red Green "This is only temporary,Unless it works!"

97 E300D 157000 miles
87 300TD ?141k? miles
Reply With Quote
  #5  
Old 02-12-2011, 09:45 PM
Registered User
 
Join Date: May 2009
Location: Fremont, NE
Posts: 59
I will search again. I did a search, maybe didn't spell something correctly..
Reply With Quote
  #6  
Old 02-12-2011, 09:59 PM
Registered User
 
Join Date: May 2009
Location: Fremont, NE
Posts: 59
Read the write up. That sounds like the ticket. This car I am getting didn't have cruise on it at all..
Reply With Quote
  #7  
Old 02-12-2011, 11:19 PM
92 300D 2.5L OBK #59
 
Join Date: Feb 2007
Location: Central FL
Posts: 1,108
look up audiovox ccs-100.
__________________
92 300D 2.5L OM602 OBK #59
Reply With Quote
  #8  
Old 02-13-2011, 02:36 AM
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,680
Here ya go.

The Official Audiovox CCS-100 Install Thread


Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote
  #9  
Old 02-13-2011, 12:02 PM
oldiesel's Avatar
Registered User
 
Join Date: May 2007
Location: florida
Posts: 677
I am quite sure the vacuum operated model is no longer available from Rostra or Audiovox unless you find some N.O.S. you will have to go with the electronic version.Just go to http://www.rostra.com/ and see what is currently available. Don
__________________
Red Green "This is only temporary,Unless it works!"

97 E300D 157000 miles
87 300TD ?141k? miles
Reply With Quote
  #10  
Old 02-13-2011, 09:35 PM
92 300D 2.5L OBK #59
 
Join Date: Feb 2007
Location: Central FL
Posts: 1,108
Ties in the same way. I'd think it would be easier than the Vac version. All the connections can be made where the stock cruise amp is located. I used an old amp for the connector and solder the connectors. Then is was plug and go.

__________________
92 300D 2.5L OM602 OBK #59
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page