I have a 1990 300SE running gasser parts car my body man is driving to his shop today. He is putting the mint leather interior and the 1990 dash into my 1983 300SD. The rear glass is delaminating in my 300SD. Will the rear glass and window moulding in the 1990 W126 chassis fit my 1983 300SD? He will be removing and repairing the rear window metal areas to fix any rust problems to stop the water coming into my trunk. We are also swapping over the 1990 tail lights and the rear bumper to my car. If the 1990 rear glass does not fit I remember reading a post that I could not find again searching the archives where someone found a good price on new glass for their older W126. I am buying a new OEM rear window gasket for this adventure. To prep the car for paint he will be removing the front and rear bumpers, front grill and the front lights, body trim and emblems and fixing the few small minor dents. Now the used Euro front lights will be going into my restomod. Anyway any suggestions for my locating a new rear glass will be a big help if the 1990 rear glass that is not delaminating does not fit my rear window. Thanks for reading this. John

I am looking to remove my rear glass to do some paint repair around the opening. I may opt to replace the gasket as well. I am curious if the pop out of this glass is as easy as other rubber gasket glass I have removed in the past?

Any word on the compatibility question of the OP?

__________________
85 300D 3 pedal. Current project.
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.

I don't know but it would not surprise if they are all the same.

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Parts numbers for rear glass and associated parts for the 1990:

https://www.ilcats.ru/mercedes/?vin=WDBCA24D8LA516347&function=getParts&class=1&catalog=568&aggtype=FG&model=126024&group=67&subgroup=030&language=en


Parts numbers for rear glass and associated parts for the 1983:

https://www.ilcats.ru/mercedes/?vin=WDBCB20A2DB045767&function=getParts&class=1&catalog=466&aggtype=FG&model=126120&group=67&subgroup=030&language=en

All different numbers. Which however still doesn't necessarily mean it won't fit.


.

__________________
'83 SD, 2x '85 SD
You are entitled to your own opinions, you are not entitled to your own facts.

The glass on my 78 300CD came out very easily, but I cut the inside lip of the gasket with a utility knife. I was worried about breaking it, but with this method very little force is required.