ON MY 16V ALL THE AIR VENT IS LOOSE!! THEY ARE ALL POINTING DOWNWARD...HAVE ANY QUICK FIX TO THIS(GLUE??) ?! THANX

JOHNSC16V

John,
Post this in the Tech Help section. Benzmac and the other techs will be more than happy to help.

Hope this helps...Lee

John:

Had the same problem with a couple of my vents (1986 2.3-16V). I ended up purchasing ALL new vents (qty: 4). The price was pretty reasonable at my local MBZ dealer -- about $9.00 each. Other than that, I was told you could remove the vents and glue a small strip of felt to either of the sides to create more friction. To remove the vents, get a couple of needle-nose pliers and a rag (to prevent gouging the vent). Grip a vent blade near each end of the vent and pull straight out. To install, just line up the slots with the pegs and push in.

Hope this helps.

Brian

BRAIN,

AS ALWAYS BRAIN, THANX ALOT...YOU HAVE REALLY HELP ME ALOT, NOT JUST THIS BUT MANY ISSUE IN THE PAST. THANX DUDE =)

ASSOC.,AIA
JOHNSC16V