![]() |
|
|
|
#1
|
|||
|
|||
96 e320
96 e320
I have a 96 e320 that has been driving me nuts. When I go to start it, it starts and the idle surges a few times before smoothing out, then when I give it some gas it stalls as it approches 2k rpm. Then when I go to restart sometimes it starts sometimes it starts and stalls right out, any ideas???? It will stumble like its out of gas, but I know that not to be the case. Karl |
#2
|
|||
|
|||
Should be throwing a fault code(s).
|
#3
|
|||
|
|||
We changed the battery and alt. and I think that might have reset whatever codes were in there. My problem is I'm afraid to drive it because I don't want to get stuck. I think the codes reset after about 40 miles.
Karl |
#4
|
|||
|
|||
It's my daughter in laws car, and the light was on. My son said it was an egr code but I didn't see it for myself. I pulled the egr valve and put a vacuum check on it and it held, I then cleaned it real good with the valve open and closed and it looked as if it was opening and closing smoothly. Any other ideas? I could really use the help.
Karl |
#5
|
|||
|
|||
If its doing as you describe, it ought to set new codes pretty quickly.
That info (or lack of same) will help point you in the right direction.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#6
|
|||
|
|||
Here are a few posts I have left in the past day or so, if you can help me out at all it would be great.
96 e320 I have a 96 e320 that has been driving me nuts. When I go to start it, it starts and the idle surges a few times before smoothing out, then when I give it some gas it stalls as it approaches 2k rpm. Then when I go to restart sometimes it starts sometimes it starts and stalls right out, any ideas???? It will stumble like its out of gas, but I know that not to be the case. We changed the battery and alt. and I think that might have reset whatever codes were in there. My problem is I'm afraid to drive it because I don't want to get stuck. I think the codes reset after about 40 miles. It's my daughter in laws car, and the light was on. My son said it was an egr code but I didn't see it for myself. I pulled the egr valve and put a vacuum check on it and it held, I then cleaned it real good with the valve open and closed and it looked as if it was opening and closing smoothly. Any other ideas? I could really use the help. Karl |
![]() |
Bookmarks |
|
|