![]() |
|
|
|
#1
|
|||
|
|||
1989 300E start up problem
First off I would like to thank everyone with the help of installing my new water pump and tensioner this past week. The install was no problem with your help.
No the problem. I posted this prblem before. When the car is cold I have a rough idle (the RMPs are around 500 and the car shakes and stalls. After the car has been driven for a couple a minutes the car idles excellent and the car drives amazing. I have already changed: water temp sensor, dist cap, dist rotor, spark plugs, fuel filter, 2 fuel pumps, fuel accumulator, air filter. The ignition wires a 4 years old. I think they are still in good shape but how do I test them just to make sure? I was thinking of doing a throttle body cleaning to see if that would be some help. I was woundering if this could be a fuel injection problem, idle control valve, fuel pressure regulator or cold start valve? Also is there a throttle positioning sensor in the car and if so could that cause me problem? I have had this problem for about 8 months and it is just getting worse. Thanks Fab Last edited by 300ESUPER; 08-28-2006 at 06:06 AM. |
Bookmarks |
|
|