For one my neutral saftey switch is acting up in that sometimes it will not turn over unless I move the selector front to rear couple of times till it finally catches. I think the problem is with the bushings in selector lever which I have heard is a real pita to replace and there might be 6 of them so in meantime I was thinking if I could bypass nss by connecting 2 purple wires so it wou lt would start in any position problem is I can not locate it. I looked above to right of gas pedal and all I see is a hard plastic covering that I cannot move or see behind. Is the junction box with 4 or 6 wires behind there? If so I might just cut it out to get at the box. Also just got done adjusting the valves now car seems to have less pep and lower top end have to push hard to hit 85mph. My valves might be a little on the loose side heard that was better then to be on tight side would that cause a loss of pep?