|
The Differential Carrier bearing preload is OK.
The Gear Back Lash spec is only for New Gears and is 0.13-0.23mm. My actual used Gears Back Lash is 0.20mm so that is within the New Gear Spec; so I am leaving that alone.
For the Gear Tooth Contact Area I did not have any Lubriplate so I just used a lumpy coat of Wheel Bearig Grease.
From the Pics I believe I am getting very good Gear Contact both coming and going on the Gear Teeth.
__________________
84 300D, 82 Volvo 244Gl Diesel
|