Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-18-2010, 12:09 PM
Kyle Blackmore's Avatar
Mostly Harmless
 
Join Date: Sep 2001
Location: almost beyond Hope...B.C.
Posts: 979
85 380SE No Start

Hi Guys, my car doesn't want to start after sitting for a week. I tested the ignition parts, replaced the ignition control unit with a spare I had. I have spark at the plugs, but the plug was wet with fuel when I pulled it to check for spark. I've run the battery down trying to start it, jumped it with another battery and still no go. Is there a way to check if my cold start valve is getting power? I haven't tried spraying carb cleaner yet, that's my next low-tech test. I know the OVP powers the cold start valve, I haven't checked it yet. Any ideas?
__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page