Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-06-2007, 11:40 PM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Strange W210 AC behavior

Honest, I searched and read a bunch of air conditioning threads before posting this. It's starting to be summer here in Houston -- temperatures creeping toward 90. I have a new-to-me '98 E300 Turbodiesel sedan. The AC seems to be working and blowing reasonably cold. The automatic climate control seems to be doing its thing...though it never does make it up to the max fan speed. Huh.

The real issue is a difference in temperature between the sides of the car. It has "dual zone," but I've never been much of a believer in that. No matter what I set the two temperature selectors to, the driver side vents are notably warmer than the passenger side vents. It's so noticeable that you can tell a difference in the two center vents above the console -- the passenger one will feel very cool, while the driver one is significantly warmer (but still cooler than ambient).

Anyone know what's going on here? I was hoping for an easy shot of refrigerant, but I'm concerned this might signal a slightly deeper problem. Any tips much appreciated.

Cheers, John

Reply With Quote
  #2  
Old 05-06-2007, 11:44 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
Quote:
Originally Posted by dukegrad98 View Post
Honest, I searched and read a bunch of air conditioning threads before posting this. It's starting to be summer here in Houston -- temperatures creeping toward 90. I have a new-to-me '98 E300 Turbodiesel sedan. The AC seems to be working and blowing reasonably cold. The automatic climate control seems to be doing its thing...though it never does make it up to the max fan speed. Huh.

The real issue is a difference in temperature between the sides of the car. It has "dual zone," but I've never been much of a believer in that. No matter what I set the two temperature selectors to, the driver side vents are notably warmer than the passenger side vents. It's so noticeable that you can tell a difference in the two center vents above the console -- the passenger one will feel very cool, while the driver one is significantly warmer (but still cooler than ambient).

Anyone know what's going on here? I was hoping for an easy shot of refrigerant, but I'm concerned this might signal a slightly deeper problem. Any tips much appreciated.

Cheers, John

that symptom does usually indicate low freon
__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
  #3  
Old 05-07-2007, 12:37 AM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Permit me to provide some more info... I figure the more I tell you guys, the more you can help me. I just took a fifteen-minute drive and went through some of the built-in climate control diagnostic readout stuff.

First off, reading #5 (evaporator temp) never got lower than 17, and hovered around 20 most of the time. I think that's degrees Celsius -- so my evaporator is only about 65-68 degrees? No wonder my car won't cool off enough! Reading #6 (ECT sensor?) was reading out 84. I didn't write down more of the codes, but would be glad to if it would help tomorrow. Outside temperature was indicated at 79 degrees at 10 p.m. while I did the test.

Also, when I pull out the fault codes, I'm getting a B1234. I think that has something to do with the sun sensor.

The following page was some help in pulling my own diagnostics, in case other newbies run across this thread later:
http://continentalimports.com/ser_ic40142.html

So, a shot of refrigerant is in order? Other tips / ideas? Thanks again!

Cheers, John
Reply With Quote
  #4  
Old 05-07-2007, 12:37 AM
Moderator
 
Join Date: Jul 2001
Location: Woolwich, Maine
Posts: 3,598
This condition was more exagerated on my car. In fact, one side would have the heat on full eventually (the driver's side, in a US car) while the other side would be on full cold. I would "fix" the problem by turning the defrost on for a few minutes and then off, and I would get ice cold air from both sides. For a while.

Turned out to be the "duovalve" for the hot water flow to the heater core on the driver's side. New duovalve and the problem went away. One of the guys on the Diesel Forum actually posted instructions on removing and cleaning the valves to fix the problem.

Hope this helps, Jim
__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)
Reply With Quote
  #5  
Old 05-07-2007, 10:46 AM
Registered User
 
Join Date: Sep 2004
Location: DFW / Collin County Texas
Posts: 1,882
Start by charging the system. As indicated earlier, often this is caused by low charge.
__________________
08 W251 R350
97 W210 E320
91 W124 300E
86 W126 560SEL
85 W126 380SE Silver
85 W126 380SE Cranberry
79 W123 250
78 W123 280E
75 W114 280
Reply With Quote
  #6  
Old 05-07-2007, 10:24 PM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
also to test if it is low freon do the following:
turn both zones to LO and hit the ec button, measure temp, and if they are the same then freon is likely your issue, if the drivers is still warm then you definately have a control issue, may even be a leaking duo valve
__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
  #7  
Old 05-07-2007, 11:06 PM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Thanks, guys. I'm going to drop by a local shop for a system charge sometime later this week if I can. Might have them put the dye in too, in case I'm leaking somewhere. Then I'll test and drive and see what happens -- will report back once I've had time to get some freon in her.

Cheers, John
__________________
'98 E300TD (W210) | Sold 6/09 with 205k and counting
'04 VW Touareg V10TDI
Reply With Quote
  #8  
Old 05-08-2007, 04:41 PM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Looks like Carson357 may have hit the nail on the head. I popped by a local shop today to get the system charged, and it was showing proper pressure on the refrigerant lines. However, it behaved very badly for the tech -- the driver's side vents were blowing out HEAT, and the passenger side was cool.

So...where to now? I'll run some searches on "duovalve." Is this something I can fix on my own, or am I about to be facing a huge dealer bill? Thanks for any tips!

Cheers, John
__________________
'98 E300TD (W210) | Sold 6/09 with 205k and counting
'04 VW Touareg V10TDI
Reply With Quote
  #9  
Old 05-08-2007, 05:36 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Have the system evacuated & properly recharged to the correct amount (WEIGHT). guage readings is a very poor method of checking for correct charge!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #10  
Old 05-08-2007, 06:12 PM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Thanks, Doc -- I called the local shop back to inquire about having this done, and they were very defensive about their work -- and the charge for the 5-minute pressure check they did for me. Bunch of pricks...I'll take my business elsewhere. Before I do anything else, given the heat that came out today, I'm going to open up the duovalve and just see if anything is sticking in there. Once it's back together, if there's no change, I'll go back and have the refrigerant done properly. Ballpark on what that should cost?

Cheers, John
__________________
'98 E300TD (W210) | Sold 6/09 with 205k and counting
'04 VW Touareg V10TDI
Reply With Quote
  #11  
Old 05-08-2007, 06:24 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Proving the DUO valve bad is a SIMPLE task that takes less that 5 minutes.

Simply block off the heater supply line with needle nose pliers.. I have special hose type pliers that won't damage the hose. If you have a piece of rubber you can use it between the pliers & the heater hose.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #12  
Old 05-08-2007, 06:56 PM
Moderator
 
Join Date: Jul 2001
Location: Woolwich, Maine
Posts: 3,598
Several of us have gone through this exact scenario. Here is an old thread, with some link to other sites with ways to check.

1998E300d heat left side ac right side

In my case the duovalve was the problem and you can tell by running the diagnostics on this site:

http://www.continentalimports.com/ser_ic40142.html

My results were posted here:

W210 Air Conditioning System Fault Codes

The net result is when the heater core temperature is at the engine coolant temperature and you have the A/C on, there is a problem that is entirely independent of the freon level or the A/C circuit efficacy. In this case the heater can overpower the A/C (which is as it should be since the outside air can be mighty cold and by the time it gets to you inside has to be warm). In my case the driver's side heater core temp was hot as hell and the passenger side, where the A/C was working, was at "ambient" or so.

With that set of symptoms the problem cannot be fixed with the freon being recharged. It is a bum valve letting engine coolant circulate through the heater core when the control system says "close" or "throttle" and the valve actuator opens the valve all the way.

There is a most excellent post on how to fix the duovalve, which I wish I had stumbled across before I paid to have mine fixe, by Parrot of Doom, but it is on another MB website:

http://forums.mercedesclub.org.uk/showthread.php?t=25909

You will have to register there too to read the instructions and view the excellent step by step photos that accompany the step by step process. It looks like a reasonable job to carried out by someone with reasonable skills. I will sure try it the next time my valve fails.

Hope this helps if the freon thing turns out not to be the answer. It wasn't for me.

Jim
__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)
Reply With Quote
  #13  
Old 05-08-2007, 08:05 PM
Moderator
 
Join Date: Jul 2001
Location: Woolwich, Maine
Posts: 3,598
Quote:
Originally Posted by M.B.DOC View Post
Proving the DUO valve bad is a SIMPLE task that takes less that 5 minutes.

Simply block off the heater supply line with needle nose pliers.. I have special hose type pliers that won't damage the hose. If you have a piece of rubber you can use it between the pliers & the heater hose.

I didn't see this post while I was researching the links for my post above. This would definitely tell you if the duovalve was the problem or not and best of all it is free.

Jim
__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)
Reply With Quote
  #14  
Old 05-08-2007, 08:21 PM
W210 E300TD Newbie
 
Join Date: Apr 2007
Location: Houston, TX
Posts: 356
Thanks, guys. I've been down looking at the car. The pinching off the heater hoses to the duovalve is pure, simple genius. Wish I'd read that before I took the whole thing apart, per ParrotofDoom's excellent instructions. The valve seemed fine. Plungers move freely, springs work, etc. I put it all back together.

While driving, I notice that diagnostic indicator #7 (low side pressure, I believe) was ranging between 11 and 13. At park or neutral, it showed readings 14 to 16. There is some "hissing" sound in the cockpit. The driver's side is blowing cool, but not as cool as the passenger's side. If I turn on the defroster for a 90-120 seconds, then back to air conditioning, the far left vent (left of the steering wheel) blows very hot air.

Does this additional info help? I think I've done all I can do short of dropping it off at the shop and telling them to make it right. Maybe a DIY can of freon? Yeesh. Thanks again for all the guidance on this new toy -- today has mostly been a disgusting one!

Cheers, John
__________________
'98 E300TD (W210) | Sold 6/09 with 205k and counting
'04 VW Touareg V10TDI

Last edited by JimSmith; 05-10-2007 at 07:29 PM.
Reply With Quote
  #15  
Old 05-09-2007, 12:45 AM
Carson357's Avatar
www.stonebrew.com
 
Join Date: Aug 2006
Location: San Diego, California
Posts: 1,116
if you do what i suggested, no need to pinch off or dissasemble anything, all can be done inside the car, when you do it a/c and heat are both off heater valve is completely closed since it is on LO, and a/c off since it is on ec, if you feel heat the valves are leaking pure and simple, if all is the same the freon is low.

turn both zones to LO and hit the ec button, measure temp, and if they are the same then freon is likely your issue, if the drivers is still warm then you definately have a control issue, may even be a leaking duo valve




Quote:
Originally Posted by dukegrad98 View Post
Thanks, guys. I've been down looking at the car. The pinching off the heater hoses to the duovalve is pure, simple genius. Wish I'd read that before I took the whole thing apart, per ParrotofDoom's excellent instructions. The valve seemed fine. Plungers move freely, springs work, etc. I put it all back together.

While driving, I notice that diagnostic indicator #7 (low side pressure, I believe) was ranging between 11 and 13. At park or neutral, it showed readings 14 to 16. There is some "hissing" sound in the cockpit. The driver's side is blowing cool, but not as cool as the passenger's side. If I turn on the defroster for a 90-120 seconds, then back to air conditioning, the far left vent (left of the steering wheel) blows very hot air.

Does this additional info help? I think I've done all I can do short of dropping it off at the shop and telling them to make it right. Maybe a DIY can of freon? Yeesh. Thanks again for all the guidance on this new toy -- today has mostly been a disgusting one!

Cheers, John

__________________
1967 250 S
1967 280SE
1968 250S
1971 280 SE
1973 220
1974 280 S
1975 450 SEL
1976 220 D
1979 300SD
1983 300 SD
1985 230 TE euro
1986 280SL
1986 500 SEL euro
1986 190E 2.3
1990 300 SE
2003 C230 K
2004 C230 K
1987 560SEL
1987 300SDL now in canada
2005 C230
1998 C43 AMG Sold to DON
1993 190E 2.6
300TD Former daily driver Totaled
current:
R320 CDI
Ram 2500 Cummins
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page