I'm rebuilding a leaky shower in a rental. Got all the tile off, so far, but the tile was stuck to what looks like globs of cement plaster over a thick metal mesh. Does anyone have any suggestions on how best to remove this stuff down to the studs?

Good news, no mold in the walls thus far.

Cut it with an angle grinder and pull it off the studs?

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13

welcome to hell. I hate wire lath

Ive had best results with a big pair of tin snips/sawzall to make strategic cuts in the lath around where you are making your repair, some heavy gloves, a crow bar, and a lot of force, the wire lath itself isn't that thick, but the plaster can be tenacious sticking into it, making it really hard to deal with. The stuff ive removed was even held on by large nails bent over, so those were a real pain to remove.

A sawzall with a metal cutting blade will really be nice to have in hand as well for long cuts in it, but the tin snips are nice for strategic location cuts for stubborn fastners

__________________
This post brought to you by Carl's Jr.

__________________
1987 560SL
85,000 miles

That's a horrible job. I use a combo of sledge hammers, crow bars, and a sawzall.

Have fun.

__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200

Use a pry bar and pull it out in sheets. Is best to leave the tile on the "mortar", keeps everything more rigid. May need to cut each panel, will be a good 10-12lbs per sq ft.

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

Are you sure that's enough? This stuff looks more like it needs this...

Start small and move up. What works for one house may not work for the next...

__________________
1987 560SL
85,000 miles

The "metal mesh" is called; metal lathe.

Use the claw of a claw hammer and a claw crowbar as well as a ball peen hammer to smack & rip the mofo off the wall. Metal lathe is sharp as a mofo, (BTDT) wear some thick leather gloves when handling/tearing/ripping at it.

How about some pics of your handywork/situation?

__________________
'06 E320 CDI
'17 Corvette Stingray Vert

The last one I did, many moons ago, I used a body grinder with a cut-off wheel and cut out what I could, followed by a good set of aviation snips (straight cut). If I had a bent nail in the way, the grinder was a good tool to use. Make sure to have some water on hand to put out any hot spots.

This is one of those jobs that nobody envies you on.

LONG LIVE DRYWALL AND SHEET ROCK!!!!

__________________
1987 560SL
85,000 miles

Tearing out enough plaster will make you grow fond of sheetrock.

__________________
2016 Corvette Stingray 2LT
1969 280SE
2023 Ram 1500
2007 Tiara 3200

So will crack repairs in plaster...especially horse hair plaster like I have in my house.

__________________
1987 560SL
85,000 miles

Wood lath?

I patched a wall with horse hair plaster in it and damned if it didn't grow a beard.

It's not going to help you but I have seen where someone framed up a new wall, studs, drywall, etc in front of the plaster wall and left the old one there.

Sheet rock is cheap and quick compared to plaster but plaster with lath will take a lot of water and still stay strong. Drywall, pretty much falls apart if soaked. I love plaster but who can afford it?

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.