|
|
|
|
|
#1
01-15-2004, 06:28 PM
|
||||
|
||||
123 engine mount tools
I used the 3/8 inch rig on all engine mount bolts except the inboard driver's side. Note the "wobble" extension. Remove the engine shocks, radiator shroud clips, and center (8mm mount bolt) before raising the engine. I use the 1/4 inch rig to remove the inboard driver's side bolt.
I bought the set of hex drivers (red container) ar harbor freight for less than $5. The Snap-On stuff was a bit higher priced, eh?
__________________
You can get farther with a smile and a gun than you can with just a smile. 1984 300D 1985 300CD 1980 300SD 1993 SL500 Last edited by Tirebiter; 01-15-2004 at 07:32 PM. 
|
|
#2
01-15-2004, 06:43 PM
|
||||
|
||||
|
I will also take this oppertunity to tell you about one of your members. I work at his shop.
Yesterday he came to my house at the crack of dawn and please note that this is the dead of winter ( January 15th ). We replaced his engine mounts and shocks ( about one and a half hours including the cleaning ), passenger side window regulator ( one hour ), turbo charger to exuast flange gasket ( one and a half hours ), and hand priming pump on the MFI pump ( 15 minutes ). He beats us if we don't do his bidding, BUT..... he never beats his wife. Claims it only makes her meaner. 
__________________
You can get farther with a smile and a gun than you can with just a smile. 1984 300D 1985 300CD 1980 300SD 1993 SL500
|
|
#3
01-15-2004, 07:24 PM
|
|||
|
|||
|
" Hawaii and Southern California" ... I 'll bet you are really freezing .... here in the ' dead of winter'..... LOL
|
|
#4
01-15-2004, 10:31 PM
|
|||
|
|||
|
hahahaha! The "Dead of Winter" Gimme a break! its -2*F here right now! Wow, musta got so cold he needed a sweatshirt.... RT
__________________
When all else fails, vote from the rooftops! 84' Mercedes Benz 300D Anthracite/black, 171K 03' Volkswagen Jetta TDI blue/black, 93K 93' Chevrolet C2500HD ExCab 6.5TD, Two-tone blue, 252K
|
 |
| Bookmarks |
|
|
Linear Mode
