you need to take the plate off the rear of the injector pump (near the oil filter housing), when you remove it, it will leak a bit of engine oil.
Imagine looking directly at the rear of the pump, looking toward the front of the car. There is a screw with a locknut. loosen the locknut and turn the screw anticlockwise 1/2 at a time, reinstall the plate and test drive it.
don't let you exhaust temps get too high from overfueling
__________________
Alex.
MB Tech
Sydney, Australia
Volvo 122S
W201 190D 2.5 manual
W202 C240
W203 C32
|