Quote:
Originally Posted by 240dddd
Thanks, appreciate the feedback. I got one side done without issue, everything came out and went back together as expected. On the other side the bushing isn't budging, either that or the tool isn't lining up correctly. I've put enough torque on it that the receiver part of the tool is starting to deform
|
Good news is the one side went smoothly, so you know how it SHOULD work.
For the other side, remove the tool and try soaking the contact area with Kroil or similar penetrant, smacking the area with a hammer to help free up corrosion, and maybe hitting it with some heat as well. And, double-check to make sure the tool is perfectly aligned. I've never seen the OE tool deform, even when I was applying enough pressure to make me worried it might break... aftermarket tool is another story though.
