PeachParts Mercedes-Benz Forum - View Single Post

dcraigk · #3 04-30-2017, 10:47 AM

I'm following Dieselgiant's website. Negative probe at the battery negative and positive probe at the plug on each of the 5 glow plugs.

I have good voltage going to the relay, before and after the strip fuse. The bulb was switched with a good bulb and still didn't light.

My meter starts at 1. If it touch the probes together I get 0.

Next he says measure the resistance at the plug for the 5 connections going to the glow plugs.

1,3 and 4 went to 0.
2 went to 3.55
5 had no change at all. It stayed at 1.

I've been reading and watching YouTube but nobody explains the different readings that are possible when reading ohms.