Well after some delays, had to order and wait on a few items to finalize the conversion, I'm down to brass tacks. I only get a couple hrs. aday to work on this project so it is taking a while to get there. I am in need of some expert advise. #1. I would desparately like to incorporate the original glow circuit into my conv. I hope someone can walk me thru this final stage. I'm posting pics of my 84 cars relay unit which I mounted inplace of the ignition module on the drv. sd. fender. I show the wire coming out of the glw. relay box and need to know where to tie into my 87 elec. sys. The large red on the right side of the pic is the main pwr. feed to the unit, the green goes to a temp sensor in the head, I don't know where or what the red w/blk wire is. Help! Also in the upper middle of the pics is the wires I believe go to the ignition sw, where and what are they for. How do I wire them into the sys.? #2. The second pic is of the IP, there are 2 shiny blk. hoses running I believe from the oil filter to a unit of some kind that has 2 what look like barb hose fittings. One is shown just above the eng. mnt. the other is to the left of the philips head screw (not below it ). Help!!!!!