Quote:
Originally Posted by funola
The pic of the tool you posted looks like it has a cutout in the long tube to clear the bend in the spindle. It does not appear it will be able to get a straight shot of the BJ flange due to the angle of the bend in the spindle. I would like to see some pics of the tool with the spindle/BJ setup in a hydraulic press.
I considered making a (knock in BJ) punch with a long 2" dia. pipe with a cutout and determined it was not possible to get a straight shot due to the bend in the spindle.
|
The JTC Tool Works; there is a very good thread on it by one of our Members and a nice pictorial in the Axle section of the DIY.
It does indeed have a cut out and that is what allows it to go on straight.