The fuel pump relay needs a square wave signal at the TD pin for the fuel pump relay to operate the fuel pump.

That signal comes from the ignition module (EZL).
You can somewhat measure that signal with a volt meter.

Try checking that signal with the fuel pump relay removed & then compare that signal when the car WON'T stay running & the fuel pump jumped again.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator