|
In all of the ETA failures that I've seen, there are some DTCs that point to the EA Module.
Check my escapade (in MENU#24) with my ETA failure. The codes that were generated were basically three;
1) in the DM (#6 ISC faulty);
2) in the EA (#2 EA plus others faulty)
3) in ABS/ASR module (#30- CAN bus communication failure).
That's where my suggestion came from. . .
If you can also swap the ABS/ASR module, then by all means do so.
__________________
Regards . . . . JimF
-------------------
'94 S500 Cpe
Visit my Mercedes Web Page
Last edited by JimF; 03-14-2007 at 12:44 AM.
|