"Since you asked, I hope that helps." Very cool info thanks!

as for mass producing it and selling it. No to me mass producing it is being able to easily crank out 20 gallons a week which is about how much fuel I use a week. Ideally I would crank out 100 gallons once a month but I am leary about having that much fuel lying around so would probably do it on a weekly basis for safety reasons.

Well I think 1/10th of 1 micron is more than withing safe parameters for any component in the engine but at $445 :-)

I still need the answer to two questions. #1 will diesel fuel and oil mix well and not separate (so I can use diesel to thin its viscosity this I plan to test later on figure will try 50/50 first and work up to 75/25 and see how it settles after a week)

#2 how much mixture can I use safety (gunking up etc..) and would additives like diesel clean etc.. help with this. if I can use 75% motor oil even adding a serving of diesel clean per tank would be a fraction of the cost of sticking with full diesel. I figure I can "adjust" the ration based on temperature. Ass some regular to the mixture to thin it in the winter and go heavier oil in the summer when its warmer (if all this proves to be safe off course) and assuming I can get ahold of this stuff free :-)