Quote:
|
Originally Posted by BioLuke
I bet this is my 123 problem too. window works fine, but doesn't go to the top, clunk clunk at the end. now to learn to replace the regulator! I am in the middle of replacing the sliding jaw on my 126. Thinking about subscribing to pindelski.com for the photo articles, but I'm cheap... probably try it on my own first.
|
I've done it on a 123, it's not that hard. The whole thing is pretty obvious when you look at it. One or two bolts hold the regulator to the window, three bolts hold the regulator to the door. Remove the regulator and motor as a unit, then remove the motor from the regulator. The whole process should take an hour.